HARGA : silakan hubungi kontak dibawah
ALAT UKUR KETEBALANFeatures:
Auto probe recognition with Auto Zero or Manual Zero.
Wide variety of dual-element probes can be used for nearly any application.
Bar graph with user-set start end values providing highest resolution around the target thickness value.
Differential Mode allows user to set a “target thickness value” and display will show the DIFFERENCE between actual and target thickness as a plus or minus value.
Includes NIST-Traceable Calibration.
TI-CMX-H for surface temps up to 300°F/150°C. Optional hi-temp probes for higher surface temperatures offered
Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db).
64 custom setups can be stored and retrieved for convenient use and labeled for easy identification
Display Hi/Lo Alarm Limits with audible and visual indicators.
2 Year Warranty & CE-Certified
Metal housing provides strong protection against harsh environments.
Measures Coatings up to 0.100
The new CHECKLINE® TI-CMX measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the TI-CMX automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating.
Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).
Five user-selected operating modes are included:
Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.
Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.
Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.
Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)
Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.
Includes: Gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, RS-232 cable and software —all in a foam-fitted carrying case.
Specifications:
Range in Steel: Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 – 9.999inches (0.63 to 254 millimeters). Echo-Echo Mode: Thru Paint & coatings measures from 0.100 – 4.000 inches (2.54 to 102 mm). Range will vary depending on the thickness
Range in Coating Only Mode: 0.0005″ – 0.1000″ / Resolution: 0.0001″ (0.013 – 2.540 mm / Resolution: 0.001 mm)
Max Coating: 0.100″ (2.54mm)
Resolution: .001 inches (0.01mm)
Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
Units: inch or mm
Measurement Modes: – Pulse-Echo (corrosion mode). – Pulse-Echo Coating (Corrosion w/o coating). – Echo-Echo (thru-paint).- Temp Comp (auto adjust for material temp).- Coating Only (Ultrasonic Coating Gauge)
Transducer Types: Dual Element (1 to 10 MHz).
Output: RS-232 for upload/download of setups
Memory capacity: TI-CMX: None. TI-CMXDL: over 200,000 measurements
Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
Auto Power off: After 5 minutes of non-use
Display: 1/8 in. VGA grayscale display 62 x 45.7mm
Keyboard: Membrane switch with twelve tactile keys
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Temp. Limits: Ambient: -20 to 120° F (-30 to 50° C).Material: -0 to 200° F (-20 to 100° C).Special high temperature model TI-CMX-H is available for 300°F/150°C and optional probes are offered for higher surface temperatures
Weight, net: 383 grams
Dimensions: 63.5 W x 165 H x 31.5 D mm
Warranty: 2 year limited
Certification: CE Approved, Factory calibration traceable to national standards
CEK JUGA YANG INI
===========================================
Nama Perusahaan : CV. GIHON JUMA SENTOSA
Profil :
CV. Gihon Juma Sentosa Merupakan Distributor Untuk Kebutuhan Instrument Industri, Bahan kimia Merck, & Instrument laboratorium pendidikan. Kami Menyediakan Gas Industry & Medical Gas, alat-alat laboratorium, Alat-alat Survey Lingkungan Hidup, dan instrumen industri kimia baik dalam kebutuhan besar dan reguler . Berlokasi di Medan, Sumatera Utara – Indonesia, anda dapat memesan Kebutuhan Bahan Kimia Merck & Instrument laboratorium perusahaan atau kebutuhan personal anda pada kami.Silahkan Hubungi Kami di 061-88369476, WA 081375912389.
Alamat :
Jl. Letjend Jamin Ginting KM. 9,5 Gg. Pinem No. 8 Kel. Mangga
Medan Sumatera Utara
Website : http://www.gihonjumasentosa.com
Telepon : +626188369476,+6281375912389
Whatsapp : 6281375912389
![Jual Murah Ice Crusher Blender Miyako Bl-302 Gsg]Y 3 Tabung Kaca](https://digitren.co.id/wp-content/uploads/2022/08/eb3389cd-0a92-4b33-b47f-246022c81f64-300x250.webp)
