Controller ICJual Main controller Built in type PNP LK G5001PV Model LK-G5001PV*1*2 Separate type LK-G5001P/LK-HD500 Type Main controller Sensor head compatibility Compatible No. of connectable sensor heads 2 Display Minimum display unit LK-HD500: 0.001 µm Display range LK-HD500: ±999.999 µm to ±9,999.99 mm (7 settings selectable) Display cycle LK-HD500: Approx 10 times/sec. Display interface Display port Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected LED indicator LASER ON Terminal block Analog output voltage ±10 V output, Output impedance: 100 Ω Analog current output 4 to 20 mA, Maximum load resistance: 350 Ω No. of analog outputs 2 TIMING 1 input Voltage input*3 RESET 1 input Auto-zero 1 input Laser control input Voltage input*4 Laser remote input Non-voltage input Alarm output PNP open-collector output General comparator output Expansion connector TIMING input Voltage input RESET input Auto-zero input Program switching input Binary selection input Alarm output PNP open-collector output Comparator output Binary output RS-232C interface Baud rate: 9,600 to 115,200 bpsData length: 8 bits, Stop bit length: 1 bit, Parity: None/even/odd USB interface USB 2.0 Hi-Speed compliant*5 Ethernet interface 100Base-TX/10Base-T*6 EtherNet/IPTMinterface Cyclic communication (implicit messaging)Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14*7 Head expansion unit connector Up to 10 head expansion units can be connected to one main controller Expansion unit connector Either of the CC-Link unit (LK-CC100) or DeviceNetTM unit (LK-DN100) can be connected Power supply Power supply voltage 24 VDC ±10 % Maximum current consumption 0.6 A or less with 1 head/3.5 A or less with 12 heads Environmental resistance Ambient temperature When one or less head expansion unit is connected: 0 to +50 °C 32 to 122 °F.When two or more head expansion units are connected: 0 to +40 °C 32 to 104 °F. Relative humidity 35 to 85 % RH (No condensation) Weight Approx. 600 g *1 PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max.Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA*2 Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to "Precautions on wiring" in the User's Manual.*3 This input is applied to all of the synchronized OUT.*4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.)When the laser class 2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited.*5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down.*6 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units.*7 The EtherNet/IPTM interface cannot be used when a CC-Link unit or a DeviceNetTM unit is installed.EtherNet/IPTM is supported by the latest controllers. For details on which controllers support EtherNet/IPTM , contact your nearest KEYENCE office.
===========================================
CEK JUGA YANG INI
Nama Perusahaan : CV. GLOBALINDO INTERNUSA
Profil : Perusahaan ini bergerak di bidang general supplier dan kontraktor yang menjual Ornamen Pagar, Peralatan Pertukangan/ perkebunan, Obat Fogging, Peralatan/ perlengkapan dapur. Kami berlokasi di Jakarta & Surabaya
Alamat :
Jl. Rambutan 8/ 47 Komplek Perumahan Pondok Candra Indah, Waru – Sidoarjo
Website : https://globalindointernusa.web.indotrading.com
Telepon :
Whatsapp :
